Universally, the 150 CNC-B bender is recognized as a “must-have” for all your manufacturing needs.
150 CNC-B Tube Bender Applications
The 150 CNC-B bender is used throughout all manufacturing industries as its uses are virtually unlimited.
If you need a machine or tooling quote, click here.
Return to home page to see additional tube benders.
FEATURES OF THE 150 CNC-B TUBE BENDER
- Simple input of machine parameters, DOB, DBB, POB (PLC-FX3U
series Mitsubishi) - Memory capacity: Unlimited
- Operational modes: jog, step and auto
- Self diagnosis: displays of fault source and remedies
- Identification of single bend from multi-bend part.
- Self option carriage use
- Safety auto prevention from bending operation when
last end section is too short - Speed levels of DOB, DBB, and POB: 16 variable settings
- Repeatability precision: DOB/POB: 0.1deg; DBB: 0.1mm
- Resolution: DOB/POB: 0.1deg; DBB: 0.1mm
- Parameter preset resolution: DOB/POB: 0.1deg; DBB: 0.1mm
- Northman Directional Valves
- Preset of processing, i.e., with mandrel or without mandrel,
auto mandrel lubrication, speed levels of DOB, DBB, and
POB / Servo System – Series A, National (Japan)
STANDARD
- Pressure Die Holder
- Wiper Die Holder
- Overhead Tie Bar (Eliminates Die Deflection)
- Pressure Die Assist
- Servo Carriage Boost
- Panasonic Servo Motors
- Mandrel Lubricator
- Mandrel Extractor
- Mandrel Early Out Programmable
- BendPro G2 Control
- Clockwise Rotation
ADDITIONAL SPECIFICATIONS FOR THE 150 CNC-B
- Capacity: 1.50″ OD x .125 Wall
- Maximum Feeding: 130ft/min
- Maximum POB: 40r/min
- Standard Maximum Radius: 10 inch
- Maximum Bend Angle: 190 degrees
- Operating Pressure: 1200psi
- Reservoir Capacity: 120 U.S. Gallons
- Approximate Weight: 7000 lbs
- Approximate Dimensions: 12’ L x 4’ W x 42” H
- Voltage: 220 volt/3 Phase/60Hz; 50Hz Optional
- Bend angle accuracy +/-: 0.1 degree
- Bend arm speed: 10 rpm
- Maximum tube length over mandrel: 6 ft
- Motor: 10HP
