The 800 CNC-B bender’s cost saving attributes means you will be able to deliver parts at or below your competitor’s prices, a real leg-up in a highly competitive marketplace.
800 CNC-B Tube Bender Applications
The 800 CNC-B bender is used for commercial refrigeration units, large truck parts, bellow, expansion and joint bending.
If you need a machine or tooling quote, click here.
Return to home page to see additional tube benders.
FEATURES OF THE 800 CNC-B TUBE BENDER
- Simple input of machine parameters, DOB, DBB, POB (PLC-FX3U
series Mitsubishi) - Memory capacity: Unlimited
- Operational modes: jog, step and auto
- Self diagnosis: displays of fault source and remedies
- Identification of single bend from multi-bend part.
- Self option carriage use
- Safety auto prevention from bending operation when
last end section is too short - Speed levels of DOB, DBB, and POB: 16 variable settings
- Repeatability precision: DOB/POB: 0.1deg; DBB: 0.1mm
- Resolution: DOB/POB: 0.1deg; DBB: 0.1mm
- Parameter preset resolution: DOB/POB: 0.1deg; DBB: 0.1mm
- Northman Directional Valves
- Preset of processing, i.e., with mandrel or without mandrel,
auto mandrel lubrication, speed levels of DOB, DBB, and
POB / Servo System – Series A, National (Japan)
STANDARD
- Pressure Die Holder
- Wiper Die Holder
- Overhead Tie Bar (Eliminates Die Deflection)
- Pressure Die Assist
- Servo Carriage Boost
- Panasonic Servo Motors
- Mandrel Lubricator
- Mandrel Extractor
- Mandrel Early Out Programmable
- BendPro G2 Control
- Clockwise Rotation
ADDITIONAL SPECIFICATIONS FOR THE 800 CNC-B
- Capacity: 6.625″ OD x .550 Wall
- Maximum POB: 20 r/min
- Standard Maximum Radius: 22 inch
- Maximum Bend Angle: 190 degrees
- Operating Pressure: 2300psi
- Reservoir Capacity: 340 US gallons
- Approximate Weight: 39000lbs
- Approximate Dimensions: 33′ L x 8′ W x 6′ H
- Voltage: 440/480/3 Phase
- Bend angle accuracy +/-: 0.1 degree
- Bend arm speed: 0.6rpm
- Maximum tube length over mandrel: 20 ft
- Motor: 50HP
