Back

600 CNC TUBE BENDER

FAST-GROWING TRUCK EXHAUST SHOPS NEED A TUBE BENDER THAT CAN HANDLE 6” O.D. PIPE AND THE 600 NC TUBE BENDER FILLS THE TREMENDOUS NEED.

If you need to bend extremely heavy pipe or very large outside diameter (O.D.) bends, then the 600 CNC-B Bending Machine is your only choice. The 600 CNC-B’s ability to bend up to 5.5” O.D. produces consistently high quality, extremely heavy wall parts. Its “heavy duty” nature means you will be able to tackle virtually any job without hesitation.

A relentless workhorse, the 600 CNC-B bender delivers the toughest of all bending jobs: extremely heavy pipe.

Categories: ,
Description

600 CNC-B Tube Bender Applications
The 600 CNC-B bender is widely utilized in the automotive industry – for truck steps, truck stacks and axle frames – the aircraft and shipbuilding industries.

FEATURES OF THE 600 CNC-B TUBE BENDER

  • Simple input of machine parameters, DOB, DBB, POB (PLC-FX3U
    series Mitsubishi)
  • Memory capacity: Unlimited
  • Operational modes: jog, step and auto
  • Self diagnosis: displays of fault source and remedies
  • Identification of single bend from multi-bend part.
  • Self option carriage use
  • Safety auto prevention from bending operation when
    last end section is too short
  • Speed levels of DOB, DBB, and POB: 16 variable settings
  • Repeatability precision: DOB/POB: 0.1deg; DBB: 0.1mm
  • Resolution: DOB/POB: 0.1deg; DBB: 0.1mm
  • Parameter preset resolution: DOB/POB: 0.1deg; DBB: 0.1mm
  • Northman Directional Valves
  • Preset of processing, i.e., with mandrel or without mandrel,
    auto mandrel lubrication, speed levels of DOB, DBB, and
    POB / Servo System – Series A, National (Japan)

STANDARD

  • Pressure Die Holder
  • Wiper Die Holder
  • Overhead Tie Bar (Eliminates Die Deflection)
  • Pressure Die Assist
  • Servo Carriage Boost
  • Panasonic Servo Motors
  • Mandrel Lubricator
  • Mandrel Extractor
  • Mandrel Early Out Programmable
  • BendPro G2 Control
  • Clockwise Rotation

ADDITIONAL SPECIFICATIONS FOR THE 600 CNC-B

  • Capacity: 5.5″ OD x .300 Wall
  • Maximum Feeding: 33 feet/minute
  • Maximum POB: 20 r/min
  • Standard Maximum Radius: 18 inch
  • Maximum Bend Angle: 190 degrees
  • Operating Pressure: 2300psi
  • Reservoir Capacity: 275 US gallons
  • Approximate Weight: 26000lbs
  • Approximate Dimensions: 24′ L x 7′ W x 6′ H
  • Voltage: 440/480/3 Phase
  • Bend angle accuracy +/-: 0.1 degree
  • Bend arm speed: 2 rpm
  • Maximum tube length over mandrel: 14 ft
  • Motor: 40HP