Back

100 CNC TUBE BENDER

THE 100 CNC-B TUBE BENDER CHURNS OUT HIGH QUALITY, MULTIPLE BENDS FOR MANY DIVERSE INDUSTRIES.

If you need a CNC bender that can produce multiple bends on a single tube or pipe, then the 100 CNC-B bender fits the bill. The 100 CNC-B bender has earned high marks from large firms that have complex bending needs. Its ability to churn out high quality, multiple bends means you will be able to produce a wide range of products for many diverse industries.

Regularly, the 100 CNC-B bender the need for two regular bending machines. Our CNC benders‘ efficiency is spectacular.

Categories: ,
Description

In any economy or budget, this machine will keep you bending for years with every feature you will need to do the jobs that come your way.

100 CNC-B Tube Bender Applications
The 100 CNC-B bender is employed extensively in the food and beverage, fuel lines and appliance industries. NASA uses a CNC tube bender at its White Sands training facility.

FEATURES OF THE 100 CNC-B TUBE BENDER

  • Simple input of machine parameters, DOB, DBB, POB (PLC-FX3U
    series Mitsubishi)
  • Memory capacity: Unlimited
  • Operational modes: jog, step and auto
  • Self diagnosis: displays of fault source and remedies
  • Identification of single bend from multi-bend part.
  • Self option carriage use
  • Safety auto prevention from bending operation when
    last end section is too short
  • Speed levels of DOB, DBB, and POB: 16 variable settings
  • Repeatability precision: DOB/POB: 0.1deg; DBB: 0.1mm
  • Resolution: DOB/POB: 0.1deg; DBB: 0.1mm
  • Parameter preset resolution: DOB/POB: 0.1deg; DBB: 0.1mm
  • Northman Directional Valves
  • Preset of processing, i.e., with mandrel or without mandrel,
    auto mandrel lubrication, speed levels of DOB, DBB, and
    POB / Servo System – Series A, National (Japan)

STANDARD

  • Pressure Die Holder
  • Wiper Die Holder
  • Overhead Tie Bar (Eliminates Die Deflection)
  • Pressure Die Assist
  • Servo Carriage Boost
  • Panasonic Servo Motors
  • Mandrel Lubricator
  • Mandrel Extractor
  • Mandrel Early Out Programmable
  • BendPro G2 Control
  • Clockwise Rotation

ADDITIONAL SPECIFICATIONS FOR THE 100 CNC-B

  • Capacity: 1.375″ OD x .120 Wall
  • Maximum Feeding: 160ft/min
  • Maximum POB: 50r/min
  • Standard Maximum Radius: 5 inch
  • Maximum Bend Angle: 190 degrees
  • Operating Pressure: 1200psi
  • Reservoir Capacity: 80 U.S. Gallons
  • Approximate Weight: 5500lbs
  • Approximate Dimensions: 10′ L x 3′ W x 4.5′ H
  • Voltage: 220 volt/3 Phase/60Hz; 50Hz Optional
  • Bend angle accuracy +/-: 0.1 degree
  • Bend arm speed: 10rpm
  • Maximum tube length over mandrel: 6 ft
  • Motor: 5HP