Tube & Pipe Bender Videos
During the installation of a bending machine, we follow our best practice by capturing the bending machine in action on video. There are several types of bending machine videos and we aim to expand the number and types of bender videos over the course of time. If you have a specific video need, please contact us.
New Hines Bending Machine | Installed for an electric supply house in South FL.
RECTANGLE 2 X 1 500 OUTBOARD
FPL BOILER TUBE SAMPLES
300NC Rectangle
Refrigeration Condensor Tubes
SQUARE 1 500 X 2 500
200CNC HITCH FEED
RECTANGLE 1 X 2 INSIDE LEG
Hines 200CNC-BendPro
150 SQUARE SAMPLES
Livestock Feeder Frame Bends
Hines 200CNC-BendPro Final Machine Testing
Hines 800CNC-B
Customer Runoff on Hines 200NC
Customer part runoff on Hines 200NC (1.25″ OD x 6.38″ CLR x .090″ Wall, 321 Stainless Steel)
Hines 600CNC-B Bending 4.5″ OD
Hines 600CNC-B bending 4.5″ OD for custom steps for a Ford F-350 as customer watches product bending bent
325 Induction Bender Product Video
Material: ASTM 106 (Steel)
O.D.: 12 inch square pipe
Industry or Use: Solar Energy
Total Running Time: :30
630 Induction Bender Product Video
Material: ASTM 106 (Steel)
O.D.: 22 inches with .500 wall
Industry or Use: Mining
Total Running Time: 1:00
1220 Induction Bender Product Video
Material:ASTM 106 (Steel)
O.D.: 36 inches with .500 wall
Industry or Use: Mining
Total Running Time: 1:00
720 Induction Bender Product Video
Material: ASTM 106 (Steel)
O.D.: 24 inches with .500 wall
Industry or Use: Oil/Gas Distribution
Total Running Time: 2:00
1200 NC Tube Bender Product Video
O.D.: 12.75” (Steel)
Industry or Use: Pre-insulated Piping Systems
Hines 800NC Overhead Pressure Die Clamp
O.D.: 8”
Industry or Use: Truck Stacks
Hines 200CNC-B
O.D.: 1.660” OD x 2.5” CLR x Ex. Heavy Wall
Industry or Use: Hand Rails
Hines 300CNC-BendPro
O.D.: 3.50” OD x 3.50” CLR
Industry or Use: Automotive Exhaust, 1D Bend
Hines 200NC-HB
O.D. –1.50” x 2” CLR x Ex. Heavy Wall
Industry or Use: Boiler Tubes
Hines 200CNC-BendPro
Hines 200NC Semi Automatic
O.D. – 2” OD x 3” CLR x.065” Wall
Industry or Use: Energy Systems
Hines 800CNC-B
O.D. – 4″ Pipe x 12.5″ CLR x .337
Hines 800 CNC-B
O.D. – 3″ Pipe x 9 3/8″ CLR x .600 Wall, Mild Steel
Hines 1000CNC-BendPro
Test bending up to 10″ OD with centerline radius capacity from 4″ to 48″
Hines 800CNC-B
Hines 200CNC-B
Hines Model 150 Semi Automatic Roll Bender
O.D. – Bending: 3/4″ Round x Schedule 40 Carbon Steel x 7″ Radius x 180 Degrees
200NC Semi Automatic
Hines 150CNC- BendPro
O.D. – Bending: 0.75″ OD x 3.75″ CLR x Stainless Steel
Hines 150CNC
Triple Stack Push Bender
