Back

426 Induction Bender

CLOSE-UP OF A 426 INDUCTION BENDER PRODUCING BENDS FOR A CHEMICAL COMPANY.

For quality, consistently uniform bends, Induction Benders are your best choice. Induction Benders produce mechanical forming on a wide range of materials and a wide range of O.D. bending, from 4” to 56.”

All Induction Benders are computer controlled.

Categories: ,
Description

426 Induction Bender Applications
The 426 Induction Bender is perfect for:

  • Petrochemical
  • Thermal or nuclear power plants
  • Mining
  • Agro-food
  • Paper
  • Oil and gas (onshore and offshore pipelines)
  • Highway billboards
  • Structure construction
  • Solar companies

If you need a machine or tooling quote, click here.

Return to home page to see additional tube benders.

STANDARD FEATURES OF THE 426 INDUCTION BENDER

  • All functions electrically and hydraulically controlled.
  • Dual Hydraulic Systems.
  • Touch screen displays bend degree. Stops the machine when arriving to the preset degree value.
  • Easily accessible transformer.
  • Tube support included.
  • Operator panel included.
  • Electrical requirements per requisition. All available.
  • Adjustable power.
  • The output voltage fluctuation is within +/- 1% even if the input power voltage fluctuates +/- 10%. This keeps temperature consistent inside the inductor during the heating process.
  • Built-in surge protection.
  • Phase locking is employed to track frequency so that inverter operates safely and efficiently.
  • Start-up at zero voltage. No amperage draw.
  • All parameters are pre-set at factory. No need to recalibrate.

ADDITIONAL SPECIFICATIONS FOR THE 426 INDUCTION BENDER

  • Max O.D. x Wall (mm) – 426 x 30
  • Min O.D. (mm) – 127
  • Maximum Bend Angle: 180 degrees
  • CLR
    Range (mm) – 380 to 2200
    Min (R/D) – 3
  • Max Main Cylinder Stroke (M) – 3.5
  • Induction Power
    Type (KGPS) – 350
    Power (KW) – 350
    Frequency (KHz) – 0.8 to 1
  • Bend Speed (mm/sec) – 0.3 to 3
  • Rear Clamp Speed (M/min) – 1
  • Rear Clamp Back (M/min) – 1.5
  • System Pressure (mpa) – 14
  • Machine CL Height (M) – 1.3
  • Overall Dimensions (M) – 11 x 4 x 2.5
  • Machine Weight (tons) – 32