Description
Used 2018 Hines Model 800 CNC-B Series Hydraulic Tube Bender Great condition with low hours. Currently located in Ohio.
Capacity: Round Tube — 7″ OD × .500 Wall (max bend)
Key Specifications
- Max Bending Torque: 33,000 Kg-M (36.4 tons)
- Maximum Bend Angle: 190 degrees
- Bend Angle Accuracy: ±0.1 degrees
- Max Bend Radius: 22 inch / Minimum Bend Radius: 3 inch
- Max Length Over Mandrel: 20 feet
- Max DBB Feeding: 33 ft/min
- Max POB: 20 RPM / DOB Bending Arm Speed: 0.6 RPM
- Motor: 50 HP
- Electrical Power: 440/480 / 3 Phase / 60 Hz
- Operating Pressure: 2,300 PSI
- Reservoir Capacity: 340 U.S. Gallons
- Approximate Weight: 39,000 lbs.
- Clockwise Rotation: Standard
- Mandrel Rod Thread Sizes Supplied: 1.75″-10 & 2″-12 rod sizes
Standard Features
- Pressure Die Holder, Wiper Die Holder, Overhead Tie Bar
- Pressure Die Assist & Hydraulic Carriage Boost
- Mandrel Lubricator, Mandrel Extractor, Programmable Early Mandrel Release
- Hydraulic Tube Support, Bend Die Delayed Return, Parts Counter
- Panasonic Servo Motors
CNC-B Series Control Features
- 12″ CRT Touch Screen (Digital 477)
- Mitsubishi PLC (FX3U series); National (Japan) Series A servo system
- Simple input of DOB, DBB, POB parameters
- Memory: 200 job storage, 6 bends per part
- Operational modes: Jog, Step, and Auto
- Self-diagnosis with fault source display and remedies
- 16 variable speed settings for DOB, DBB & POB
- Repeatability: DOB/POB 0.1°, DBB 0.1 mm
- Northman directional valves
- Auto-prevention of bending when last end section is too short
Call (800) 949-8344 for a quote.
